Step-by-Step guide to using a face cream filling machine

Loading hopper

After mixing, you need to load the cream into the machine’s hopper. Before the machine fills each container, the hopper packs the cream in it.Before pouring the cream, make sure that the hopper is clean and dry.

Use a spatula or pump to move the cream from the mixing bowl to the hopper.Work slowly to avoid spills or bubbles.

Face cream filling machines work with many types of products. You can fill watery serums, thick lotions, or even balms. The table below shows some examples:

粘度タイプ	Examples
水性、または低粘度	トナー、オイル、セラム
ローション、または中粘度	シャンプー、シャワージェル、日焼け止め、液体石鹸
クリーム、または高粘度	フェイシャルクリーム、ヘアジェル、歯磨き粉

Modern machines use powerful pistons and no drippers. You can fill jars or tubes with thick or thin products そして adjust the speed to suit the type of cream you use. This flexibility can help you process many products with one machine.

Adjust filling volume and speed

Adjusting Volume

Set the filling amount before starting the machine. This step ensures that each container gets the correct amount.Most machines allow you to change the filling volume through a dial, PCL touch screen, or knob, and you can choose how much each jar or tube contains.If you want 50 grams of cream, cURL Too many subrequests..

cURL Too many subrequests. 

cURL Too many subrequests.

• cURL Too many subrequests.

• cURL Too many subrequests.

• cURL Too many subrequests.

ヒント cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.If you want to fill with thick cream, slow down the machine,For lighter lotions, you can make it faster.

Different machines have different speed controls. Here is a quick look at how each type works:不同的机器有不同的速度控制。以下是每种类型的工作原理：

• Manual face cream filling: You do everything by hand. You press a lever or button for each fill. This way is slow and depends on how fast you work.

• Semi-Automatic face cream filling: You start filling with a foot switch or button. The machine fills one container, then waits for you to start the next. This is good for small batches and gives you more control.

• Automatic face cream filling: The machine works by itself. Sensors and computers control the filling. You set the speed and volume, then let the machine do the job. This is best for big batches and saves time.

Here is a table that compares the main features of each machine type:

特徴	Manual Face Cream Filling	Semi-Automatic Face Cream Filling	Automatic Face Cream Filling
Operator Requirement	Needs someone all the time	Needs someone to start each fill	Needs very little help from a person
Filling Control	You control it by hand	Use a foot switch or button to start filling	Sensors and computers do all the work
Production Speed	Slow, depends on the person	Medium speed, good for small batches	Fast, works all the time
コスト	Usually costs less	自動機よりもコストが低い	Costs more, but saves money on workers
メンテナンス	Depends on how old it is	Needs less fixing because it is simple	Needs more fixing because it is complex

Choose a machine to meet your needs. If you want to fill a large number of creams, an automatic cream production line machine is the best. For small batches or tests, use manual or semi-automatic machines.

Face cream filling and capping

Starting the process

You have set up your machine and prepared your cream. Now you can begin the filling process. Start by turning on the power and checking that the hopper is loaded. Make sure the filling nozzles are clean and ready.

Select your desired settings for fill volume and speed. Press the start button or use the touchscreen controls to begin.

Automatic machines work quickly. You can fill up to 30-50 bottles every minute. This speed helps you finish large batches in less time. If you use a semi-automatic or manual machine, you control the pace.

cURL Too many subrequests.

cURL Too many subrequests. 

cURL Too many subrequests. cURL Too many subrequests.cURL Too many subrequests.

cURL Too many subrequests. そして cURL Too many subrequests.cURL Too many subrequests., cURL Too many subrequests.

You can use these techniques to make sure your filling stays accurate:

• Check the filled containers for leaks or air bubbles.

• Watch the display screen for error messages or warnings.

• Listen for unusual sounds from the machine.

• Use inline sensors to track the cream’s flow and thickness.

If you monitor the output closely, you save materials and avoid waste. You can switch between different products quickly when you need to. This helps you follow industry rules and keep your customers happy.

注意： Regular monitoring helps you catch problems early. You can fix issues before they affect your whole batch of Face Cream.

Once the setup is complete:

1. Place containers (jars, tubes, or bottles) on the conveyor belt.

2. について nozzle automatically dispenses the measured amount of cream into each container.

3. The capping system seals the jar tightly, maintaining product freshness.

Optional Integration: Combine with an 自動ラベリング機 to create a full skincare cream production line.

After filling

After you are done, turn off the machine.Press the stop button or toggle the power switch and wait for all moving parts to stop moving.

This can ensure your safety and protect the machine. Remove the packed containers from the conveyor belt or pallet, pick up each one with both hands, and put them on a clean flat table.

If you use a semi-automatic or manual machine, please check the nozzle for dripping, make sure that no cream leaks out before moving the container, and immediately wipe off anything spilled to keep it clean.

点検

You need to check every filled container to make sure it is good. Look at the outside of each jar or tube. Check for leaks, cracks, or spills. Make sure the lids or caps are tight. If you see a problem, put that container aside. You can fix it or throw it away.

Checking does not stop with just looking. Use these steps to inspect your face cream containers: Weigh each container to see if the fill is right. Look at the cream to see if it is smooth and the color is even. Smell the cream to make sure it smells normal. Test a sample to check the texture and how it feels.

Cleaning & Maintenance

Cleaning Steps 

You must clean your face cream filling machine after each use. Stainless steel parts are easy to wash and stop contamination. Follow these steps to keep your machine safe and ready:

1. Take the machine apart. Remove all parts you can, like the hopper and nozzles.

2. Wash each part with water. Get rid of leftover cream and dirt.

3. Use a cleaning solution. Put it on all surfaces to remove oils and sticky stuff.

4. Scrub tough spots. Use a soft brush for places where cream is stuck.

5. Rinse again with clean water. Make sure no soap or cleaner is left.

6. Sanitize the machine. Use a food-safe sanitizer to kill germs.

7. Dry all parts well. Let them air dry or use a clean towel.

8. Put the machine back together. Make sure everything fits right.

ヒント Wear gloves when you clean. This keeps your hands safe and stops germs from spreading.

The following is the installation and debugging tutorial video：

Routine care 

You can keep your machine working well by doing regular maintenance. Daily and monthly jobs help stop breakdowns and make your machine last longer.

Frequency	cURL Too many subrequests.	説明
cURL Too many subrequests.	cURL Too many subrequests.	cURL Too many subrequests.
cURL Too many subrequests.	cURL Too many subrequests.	cURL Too many subrequests.
cURL Too many subrequests.	cURL Too many subrequests.	cURL Too many subrequests.
cURL Too many subrequests.	cURL Too many subrequests.	Test safety features to protect operators.
Monthly	Deep Cleaning	Take apart and clean all parts thoroughly.
Monthly	Replacing Wear Parts	Change seals and belts every 6 to 12 months.
Monthly	Sensor Calibration and Adjustment	Calibrate sensors for accurate filling.
Monthly	Component Alignment Check	Check alignment to prevent vibration and damage.